Water Bath
A: The amount of clean tap water into the studio Water Tank, place the container.
B: Power on.
C: Select constant temperature:
Set the temperature "setting - measurement" selector switch to "Settings", adjust the temperature control knob, digital display the required set temperature.
Set the temperature "setting - measurement" selector switch to "measurement", the figure shows the actual working temperature of the water tank (red indicator light, indicating the heater work).
D: work is completed, the temperature control knob at the minimum, cut off the power.
E: If the Water Bath pot is not used for a long time, the water in the studio water tank should be excluded, wipe with a soft cloth and dry.
F: Do not use the heater in the water bath without water
Model
Specs | Single hole
DZKW-D-1 | Double holes DZKW-D-2 | One line four holes DZKW-D-4 | One line six holes
DZKW-D-6 | Double line four holes DZKW-S-4 | Double line six holes DZKW-S-6 | Double line eight holes DZKW-S-8 |
Rated power(W) | 300 | 500 | 1000 | 1500 | 1000 | 1500 | 2000 |
Work voltage(V) | 220V 50Hz | ||||||
temperature Uniformity | ≤±1℃ | ||||||
temperature fluctuation | ≤±1℃ | ||||||
Temperature control range | TR+10~100℃ | ||||||
Control temperature sensitivity | ≤±1℃ | ||||||
Indication Error | ≤±2℃ |
Factory: