Concrete Compaction Magnetic Lab Concrete Vibrating Table

Concrete Magnetic shaker

Methods of use

The vibration table working procedure is controlled by the controller. Put the concrete test molds on the table, turn on the power switch, set the time to the required value, time set range 0-999 seconds arbitrary, open the table control switch, press the start key to work, in the working time can press the stop switch, a work program to complete, after the vibration table stop, closed the magnetic control switch, take down the test molds. the next test, press start switch digital display will automatically clear zero.Concrete Compaction Magnetic Lab Concrete Vibrating Table

Technical parameters

1. Size: 800X600mm,1000*1000mm

2. Voltage: 380V/50HZ

3. Magnetic disk voltage: 36V

4. amplitude: 0.5 ± 0.02 MM

5. vibrator power: 1.1 kw 1.5 kw

6. vibration frequency: 50HZ

7. noise test: no more than 80 db